2008 Suzuki SX4 Oil Type, Capacity, and Maintenance Guide

The 2008 Suzuki SX4 delivers durability and smooth driving when maintained with the correct engine oil. Understanding the proper oil type, capacity, and maintenance steps is key to keeping the engine running efficiently for years.


Content in this publication

Recommended Oil Type for the 2008 Suzuki SX4

The recommended engine oil viscosity for the 2008 Suzuki SX4 is SAE 10W-30, ideal for temperatures above -20°C (-4°F). This oil grade ensures proper lubrication, cold-start protection, and optimal performance in moderate to warm climates.

For colder environments, 5W-30 may be suitable, providing better flow during freezing starts while maintaining viscosity under heat.

ConditionRecommended Oil Type
Above -20°C (-4°F)SAE 10W-30
Below -20°C (-4°F)SAE 5W-30

Engine Specifications and Oil Capacity

The 2008 Suzuki SX4 is powered by a 2.0L 4-cylinder engine (Engine Code: 1997cc). It’s known for a balanced mix of responsiveness and reliability.

SpecificationDetails
Engine Type2.0L 4-Cylinder (1997cc)
Fuel TypeDiesel
Recommended Oil Viscosity10W-30
Oil Capacity (with filter)4.8 quarts (4.5 liters)
Oil Drain Plug Torque26 ft-lbs (35 Nm)

When performing an oil change, always replace the oil filter. The filter removes contaminants, ensuring long-term engine protection and improved fuel efficiency.

You may be interested in readingSuzuki SX4 Engine Oil Capacity, Type, and Change Intervals (2006–2025)Suzuki SX4 Engine Oil Capacity, Type, and Change Intervals (2006–2025)

Step-by-Step Oil Change Procedure

  1. Warm up the engine for a few minutes to thin the oil for easier draining.
  2. Lift the vehicle safely using ramps or jack stands.
  3. Remove the oil drain plug and allow the old oil to drain completely.
  4. Replace the drain plug seal to prevent leaks.
  5. Tighten the drain plug to exactly 26 ft-lbs.
  6. Install a new oil filter that matches OEM specifications.
  7. Refill with 4.8 quarts of 10W-30 oil.
  8. Start the engine and let it idle for 1–2 minutes to circulate the oil.
  9. Check the oil level with the dipstick and top up if necessary.

Oil Filter Recommendations

To achieve the best results, use OEM or high-quality aftermarket oil filters designed for the SX4’s diesel engine.

Top-rated oil filters include:

  • Suzuki OEM Filter (16510-82703)
  • Bosch Premium 3330
  • FRAM PH6607
  • Mobil 1 M1-108A

These filters provide superior dirt-holding capacity and long-term filtration efficiency.


Importance of Regular Oil Changes

Changing the engine oil regularly ensures:

  • Reduced internal friction and wear
  • Enhanced fuel efficiency
  • Smoother engine operation
  • Prevention of sludge buildup

For the 2008 Suzuki SX4, the oil should be replaced every 5,000–7,500 miles (8,000–12,000 km) depending on driving habits and conditions.

You may be interested in readingSuzuki SX4 Engine Oil Capacity, Type, and Change Intervals (2006–2025)Suzuki SX4 Engine Oil Capacity, Type, and Change Intervals (2006–2025)
You may be interested in readingSuzuki SX4 Wiper Blade Size Guide (2007–2013)Suzuki SX4 Wiper Blade Size Guide (2007–2013)

Vehicles driven under severe conditions—frequent short trips, dusty environments, or high loads—should have oil changes more frequently, around every 3,000–5,000 miles.


Oil Drain Plug and Seal Maintenance

The oil drain plug seal plays a critical role in preventing leaks. Replace it during every oil change to maintain a tight seal.
When reinstalling the plug, apply the recommended torque of 26 ft-lbs—this ensures a secure fit without damaging the threads or the oil pan.


Common Oil-Related Issues and How to Prevent Them

1. Low Oil Level

Neglecting to check oil levels can lead to poor lubrication and overheating.
Prevention: Check oil every 1,000 miles using the dipstick.

2. Dirty or Degraded Oil

Overused oil loses viscosity and fails to protect the engine.
Prevention: Stick to scheduled oil changes and use high-quality synthetic or semi-synthetic oil.

3. Oil Leaks

Leaks may result from a damaged drain plug gasket or worn-out seals.
Prevention: Replace seals and gaskets with every oil change, and monitor undercarriage spots regularly.

You may be interested in readingSuzuki SX4 Engine Oil Capacity, Type, and Change Intervals (2006–2025)Suzuki SX4 Engine Oil Capacity, Type, and Change Intervals (2006–2025)
You may be interested in readingSuzuki SX4 Wiper Blade Size Guide (2007–2013)Suzuki SX4 Wiper Blade Size Guide (2007–2013)
You may be interested in readingSuzuki SX4 Alternator ReplacementSuzuki SX4 Alternator Replacement

Final Maintenance Tips

  • Always use premium-quality 10W-30 oil meeting API SN or higher standards.
  • Avoid mixing oil grades.
  • Keep a log of oil change dates and mileage for future reference.
  • Proper disposal of used oil and filters is required—take them to a certified recycling center.

Summary Table

ParameterSpecification
Oil TypeSAE 10W-30
Capacity4.8 quarts
Drain Plug Torque26 ft-lbs
Oil FilterReplace every oil change
Change IntervalEvery 5,000–7,500 miles

In summary, the 2008 Suzuki SX4 thrives on consistent maintenance with the correct 10W-30 oil and regular filter replacements. Adhering to these specifications ensures smooth engine performance, longevity, and dependable operation mile after mile.

If you want to know other articles similar to 2008 Suzuki SX4 Oil Type, Capacity, and Maintenance Guide you can visit the category Service and Parts.

Auto Guide

I show you the best reviews of all car brands in the USA, the information we collect and show is verified by our mechanics, we hope that everything you read here is useful to buy the car of your dreams

More content of your interest

Deja una respuesta

Tu dirección de correo electrónico no será publicada. Los campos obligatorios están marcados con *

Subir