Peugeot 208 Tyre Pressure Reset: Step-by-Step TPMS Light Guide (2012–2019)

When the TPMS warning light illuminates on your Peugeot 208, it means your car’s tyre pressure monitoring system has detected incorrect air pressure in one or more tyres. Once the issue is resolved, you’ll need to reset the TPMS light so the system can correctly monitor pressure again.

In this complete guide, we’ll walk you through both reset methods used on the Peugeot 208 (2012–2019), along with key pressure tips and troubleshooting insights to keep your tyres performing at their best.

Understanding the Peugeot 208 TPMS System

The Tyre Pressure Monitoring System (TPMS) on the Peugeot 208 continuously measures air pressure inside each tyre. If one tyre drops significantly below the recommended PSI, the dashboard light appears.

However, after reinflating the tyres, the system does not automatically recognize the new pressure—it must be manually reinitialized.

Before Resetting the TPMS Light

Before performing a reset, make sure:

• All tyres (including the spare, if applicable) are inflated to the correct manufacturer-recommended pressure.
• The car is parked on a flat surface and the ignition is off.
• You have a cordless tyre inflator or a reliable air compressor handy.

Recommended Tyre Pressures for Peugeot 208 (2012–2019):

You may be interested in readingPeugeot 208 Dashboard Warning Lights and Symbols Explained (2012–2024)

• Front tyres: 32 PSI (2.2 bar)
• Rear tyres: 30 PSI (2.1 bar)
• Check your owner’s manual or the driver’s door label for model-specific pressures.

Method 1: Resetting TPMS via the Centre Console Screen

This is the most common reset procedure for Peugeot 208 models equipped with the touchscreen infotainment system.

Step-by-Step Instructions

1. Turn on the Ignition
   Start the vehicle’s ignition but do not start the engine.
2. Access the ‘Driving’ Menu
   From the main screen, navigate to “Driving” or “Vehicle Settings”, depending on your model year.
3. Select ‘Under-Inflation Initialisation’
   This option is typically located under the tyre pressure or safety settings section.
4. Confirm the Reset
   A message will appear reading:
   “Ensure that the pressures of the 4 tyres have been adjusted. Reinitialise?”
   Select “Yes” if all tyres are correctly inflated.
5. Final Confirmation
   A message should now display:
   “Tyre Pressures Registered” — this means the system has accepted your new baseline pressures.

Important: Do not attempt to reset while driving. The system will display “Reinitialisation not possible when driving.”

Method 2: Resetting with the Physical Button

Some Peugeot 208 models (particularly earlier versions or those without the touchscreen system) include a dedicated TPMS reset button.

To Perform the Reset:

1. Turn on the Ignition without starting the engine.
2. Locate the Reset Button — typically found behind the steering wheel on the dashboard panel, next to the driver’s door.
3. Press and Hold the button until you hear a confirmation beep.
4. Once you hear the beep, the TPMS light should turn off, indicating the system has been reinitialized.

Why the TPMS Light Stays On After Reset

If the warning light remains illuminated even after completing the reset:

• One or more tyres may still have incorrect pressure.
• There may be a slow puncture or valve leak.
• The TPMS sensor battery could be failing (common after 5–7 years).
• You attempted to reset while driving — the system only resets when stationary.

When to Seek Professional Help

If the light doesn’t go off after multiple resets, it’s advisable to visit a Peugeot dealer or certified tyre centre. They can scan the TPMS sensors for faults or replace defective units.

Tips for Maintaining Correct Tyre Pressure

• Check pressures monthly and before long journeys.
• Use a digital pressure gauge for accurate readings.
• Inspect for visible tyre damage or uneven wear.
• Keep a portable inflator in your boot for emergencies.
• Adjust pressure according to load and driving conditions (e.g., highway vs. city).

Common Peugeot 208 TPMS Error Messages

How TPMS Improves Safety and Efficiency

A properly functioning TPMS helps:

Peugeot 208 Dashboard Warning Lights and Symbols Explained (2012–2024)

Peugeot 208 Engines: Full Guide to Petrol, Diesel, and Hybrid Powertrains

• Maintain optimal fuel efficiency
• Extend tyre lifespan
• Ensure better grip and braking performance
• Prevent blowouts caused by underinflated tyres

Recommended Tools for DIY TPMS Maintenance

Final Thoughts

Resetting the tyre pressure warning light on a Peugeot 208 is a straightforward process when done correctly. Whether your model uses a touchscreen console or a physical reset button, following the right sequence ensures the TPMS system operates accurately—keeping your drives safer, smoother, and more efficient.

Frequently Asked Questions

1. Can I reset the Peugeot 208 TPMS while driving?
No. The system disables reset functionality when the car is moving.

2. How often should I check my tyre pressures?
At least once per month or before long trips.

3. Do I need special equipment to reset the TPMS?
No. Only a proper tyre inflator and access to your console or reset button are needed.

4. Why does my TPMS light come on intermittently?
Temperature changes or slow air leaks can cause fluctuating readings.

5. How much does a TPMS sensor replacement cost?
Typically between £40–£80 per sensor, including fitting.

Peugeot 208 Dashboard Warning Lights and Symbols Explained (2012–2024)

Peugeot 208 Engines: Full Guide to Petrol, Diesel, and Hybrid Powertrains

Peugeot 208 Timing Belt Replacement Cost UK (2025 Guide)

If you want to know other articles similar to Peugeot 208 Tyre Pressure Reset: Step-by-Step TPMS Light Guide (2012–2019) you can visit the category Service and Parts.