Complete Guide to Replacing the Front Wheel Bearing on the Mitsubishi Mirage 1.2L

The Mitsubishi Mirage 1.2L is an affordable and efficient vehicle, but like any car, it requires regular maintenance to ensure optimal performance. One of the critical components that can wear out over time is the front wheel bearing. This article provides a detailed guide on how to replace the front wheel bearing on the Mitsubishi Mirage 1.2L, including estimated costs, necessary tools, and the steps to follow.

What is a Wheel Bearing and Why Is It Important?

A wheel bearing is an essential part of a vehicle’s suspension and steering system. It allows the wheel to rotate smoothly with minimal friction, bearing the weight of the vehicle and facilitating movement. A worn-out bearing can cause strange noises, vibrations, and in extreme cases, steering failure, compromising the safety of the driver and passengers.

Mitsubishi Mirage Lug Nut Size Guide (2025 Update)

Signs of a Damaged Front Wheel Bearing

It is crucial to identify the symptoms of a faulty wheel bearing early to avoid further damage. Some common signs include:

• Strange Noises: Roaring or humming noises coming from the wheels, especially when turning.
• Steering Wheel Vibrations: A sense of instability or vibration while driving.
• Vehicle Pulling to One Side: The car tends to drift to one side without driver input.
• Uneven Tire Wear: Uneven tire wear can indicate bearing problems.

Estimated Costs for Replacing the Front Wheel Bearing

The cost of replacing the front wheel bearing on a Mitsubishi Mirage 1.2L can vary depending on the model year and location. On average, costs are as follows:

Mitsubishi Mirage Lug Nut Size Guide (2025 Update)

Mitsubishi Mirage Front Brake Pads Replacement Guide (2012–2016)

• Total Estimated Cost: Between $398 and $529 USD.
• Labor Cost: Between $246 and $360 USD.
• Parts Cost: Between $152 and $169 USD.

These ranges do not include taxes or additional fees and can vary depending on the shop and geographical location.

Tools Needed for the Replacement

To perform the front wheel bearing replacement, the following tools are required:

Mitsubishi Mirage Lug Nut Size Guide (2025 Update)

Mitsubishi Mirage Front Brake Pads Replacement Guide (2012–2016)

Mitsubishi Mirage Timing Belt or Chain Guide (1985–2024)

• Hydraulic Jack and Stands: To lift and secure the vehicle safely.
• Wrench and Socket Set: To remove nuts and bolts.
• Bearing Extractor: A specialized tool to remove the old bearing.
• Rubber Mallet: To avoid damaging parts when tapping them.
• Hydraulic Press: Needed to install the new bearing on some models.
• Lubricant: To aid in assembly and prevent corrosion.

Steps to Replace the Front Wheel Bearing

1. Vehicle Preparation

• Lift the Vehicle: Use the hydraulic jack to lift the vehicle and secure it with the stands.
• Remove the Wheel: Remove the corresponding wheel to access the work area.

2. Disassemble Components

• Remove the Brake Caliper: Take off the brake caliper and hang it to avoid straining the brake cable.
• Remove the Brake Disc: Take out the brake disc to access the wheel hub.
• Remove the Wheel Hub: Loosen and remove the bolts securing the hub to the suspension.

3. Extract the Old Bearing

• Use the Extractor: Use the bearing extractor to remove the old bearing from the hub.
• Clean the Area: Clean the area thoroughly before installing the new bearing.

4. Install the New Bearing

• Prepare the New Bearing: Lightly lubricate the new bearing with appropriate grease.
• Hydraulic Press: If needed, use the hydraulic press to install the new bearing onto the hub.
• Reassemble in Reverse Order: Reassemble all components in the reverse order of disassembly.

5. Verification

• Noise Check: Turn the wheel by hand to ensure the new bearing is functioning properly.
• Test Drive: Take the vehicle for a test drive to check for any abnormal noises or vibrations.

Additional Tips

• Replacement in Pairs: It is recommended to replace both front wheel bearings at the same time to maintain balance and prevent uneven wear.
• Use Original Parts: Opt for original or high-quality parts to ensure durability and vehicle performance.
• Regular Maintenance: Perform periodic inspections of the bearings and other suspension components to detect issues early.

Conclusion

Replacing the front wheel bearing on a Mitsubishi Mirage 1.2L is a task that can be completed with the right tools and by following the proper steps. It is essential for maintaining the vehicle’s safety and performance. If you lack experience or the necessary tools, it’s advisable to seek professional help to perform this service.

For a detailed visual guide on replacing the front wheel bearing on the Mitsubishi Mirage, you can check out the following video:

If you want to know other articles similar to Complete Guide to Replacing the Front Wheel Bearing on the Mitsubishi Mirage 1.2L you can visit the category Service and Parts.