
Troubleshooting and Fixing Radio Issues in Your Mitsubishi Mirage: A Comprehensive Guide

Is the radio in your Mitsubishi Mirage giving you trouble? Whether it’s not turning on at all or there’s no sound coming from the speakers, you're not alone. These issues are common and can often be fixed without professional help. In this detailed guide, we will explore the potential causes of radio malfunctions in your Mitsubishi Mirage, including both situations where the radio is completely unresponsive and where it turns on but doesn't produce any sound. We’ll also cover how to troubleshoot each issue and offer solutions to get your radio working again.
Radio Won’t Work at All – Causes and Fixes
If your Mitsubishi Mirage's radio isn't turning on, you might be facing a few possible issues. Let's go through each potential cause systematically.
Cause 1: Blown Fuse
The simplest and most common cause of a radio not working is a blown fuse. Fortunately, checking and replacing a fuse is a straightforward task that can often resolve the problem.
How to Test a Fuse:
- Locate the Fuse Box: Typically, in most vehicles, including the Mitsubishi Mirage, the fuse box is located to the left of the driver’s seat. Consult your owner’s manual for the exact location.
- Find the Radio Fuse: Look for the radio fuse in the fuse box. A schematic will usually be printed inside the fuse box door.
- Inspect the Fuse: Visually inspect the fuse. You’ll see a small wire between two prongs; if the wire is broken, the fuse is blown.
- Use a Test Light: A more accurate way to check a fuse is by using a test light. Ground the test light to a metal surface in the car and touch each prong of the fuse. If only one prong lights up, the fuse is blown and should be replaced. If both prongs light up, the fuse is fine.
Cause 2: Wiring Issue
If the fuse is in good condition, the next step is to check the wiring that connects the radio to the car's electrical system. Loose or corroded wiring can disrupt power supply to the radio.
You may be interested in reading
Steps to Check the Wiring:
- Check Grounding: Ensure the radio has a solid ground connection.
- Use a Multimeter: Use a multimeter to check the voltage level of the radio wiring. If there’s a voltage drop, the wiring could be faulty, which might cause the fuse to blow repeatedly.
- Inspect for Loose Connections: Look for any loose, damaged, or corroded wires that could be causing a disruption in power flow.
Cause 3: The Radio Itself
If the fuse and wiring check out, the issue might lie with the radio itself. Radios can fail due to internal malfunctions or wear and tear. If you’ve ensured that power is getting to the radio, but it still won’t work, it might need repair or replacement.
The Radio is On But No Sound – Common Causes and Solutions
Sometimes, your Mitsubishi Mirage’s radio might power on but not produce any sound. This can be frustrating, but there are several potential causes that you can troubleshoot.
Cause 1: Broken Antenna
A broken antenna is a common culprit when the radio turns on but you don’t hear anything through the speakers. Even though the tuner might be active, a damaged antenna can prevent a proper signal from being received.
How to Fix:
- Inspect the Antenna: Check if the antenna is properly attached. Ensure that it’s bolted securely and is not visibly damaged.
- Replace the Antenna: If the antenna appears damaged or is missing, replacing it should solve the issue.
Cause 2: Anti-Theft Mode
Another possible issue could be your Mitsubishi Mirage’s radio being in anti-theft mode. This occurs when the radio detects a disconnection from the car’s power supply, such as after the battery has been removed or replaced.
You may be interested in reading

Steps to Fix:
- Enter the Radio Code: If your radio prompts you for a code, you’ll need to enter it. The radio code is typically found in your vehicle’s owner’s manual or on a card that came with your vehicle.
- Look for the Radio Code: In some cases, you might find the radio code on a sticker inside the glove box or printed in the owner’s manual.
Cause 3: CD or Aux Mode
If the radio is on, but no sound is coming through, it’s possible that the radio is stuck in CD or auxiliary mode, especially if you’ve recently used those inputs.
How to Fix:
- Test the Aux or CD Mode: Try connecting a device to the aux input or inserting a CD to see if the sound starts working again.
- Switch Back to Radio Mode: If it’s stuck on CD or aux mode, switching back to radio mode should resolve the issue.
Frequently Asked Questions
Does the radio stop working after a car crash?
No, the radio in your Mitsubishi Mirage should continue working after a crash unless there is an issue with the wiring, fuse, or radio itself. If it stops working, check for blown fuses or damaged wiring.
Why is one of my Mirage's speakers not working?
A non-functioning speaker might be due to a damaged speaker wire or a blown speaker. If you hear static, the speaker is likely blown. However, if there is no sound at all, a short in the wiring could be the problem. Inspect the wiring carefully, especially at points where the harness enters the doors, as these areas are prone to damage.
Conclusion
Having issues with your Mitsubishi Mirage’s radio can be frustrating, but the good news is that most of these problems can be resolved quickly with a little troubleshooting. Whether it’s a blown fuse, a wiring issue, or the radio itself, understanding the common causes and how to fix them will help get your car’s sound system back to normal in no time.
You may be interested in reading


For more in-depth guidance on car maintenance and troubleshooting, don’t hesitate to explore our other guides.
If you want to know other articles similar to Troubleshooting and Fixing Radio Issues in Your Mitsubishi Mirage: A Comprehensive Guide you can visit the category Common Problems.
Deja una respuesta
More content of your interest