Volvo XC40 (2019–2025): How to Check the Engine Oil Level

In this complete guide, we explain how to check the engine oil level in the Volvo XC40 (2019–2025). Unlike most vehicles, this compact SUV does not use a traditional dipstick. Instead, it relies on an electronic oil level sensor that displays the reading through the vehicle’s infotainment screen. Below, we’ll walk you through the process, the conditions you need to meet, and the best maintenance tips to ensure accuracy and long engine life.

Why the Volvo XC40 Has No Dipstick

A Modern Digital System

Starting from 2019, the Volvo XC40’s Drive-E engines no longer include a physical oil dipstick. Instead, Volvo implemented a digital monitoring system that measures the oil level electronically and shows it on the vehicle’s central screen.

Benefits and Considerations

• ✅ Convenience: You no longer need to manually check under the hood.
• ⚙️ Accuracy: The system measures precisely when conditions are right.
• ⚠️ Important: You must follow certain conditions—such as flat ground and engine off—to get a valid reading.
• 🚫 Note: The absence of a dipstick doesn’t mean you can’t check your oil; it simply requires a different process.

When and How Often to Check the Oil Level

Volvo’s Recommendations

Volvo advises checking the oil level regularly through the vehicle’s Car Status application. The digital gauge shows a bar between “MIN” and “MAX,” similar to a dipstick reading.

Frequency

Although the car monitors oil levels automatically, it’s good practice to check:

Volvo XC40 Windshield Replacement Cost: Complete Guide for Owners in 2025

• Before long trips or every few weeks.
• After performing an oil change or adding oil.
• Whenever the “Oil Level Service Required” warning appears.

If the warning light turns on, stop the vehicle as soon as possible and seek assistance from an authorized service center.

Step-by-Step: How to Check the Oil Level in a Volvo XC40

Step 1: Start the Vehicle

Turn on the ignition or start the car to activate the system. The oil level display becomes available only when the engine is running or in ignition mode.

Step 2: Open the “Car Status” Menu

1. Go to the center display.
2. Open the Apps view.
3. Select Car Status.
4. Tap Status to view the current oil level.

Step 3: Read the Display

The screen will show an indicator with “MIN” and “MAX” marks. The highlighted section represents your engine’s current oil level. If you see “No value available,” it means the car hasn’t met the proper conditions to measure yet—it’s not an error.

Step 4: Meet the Correct Conditions

For the system to display an accurate reading, ensure the following:

Volvo XC40 Windshield Replacement Cost: Complete Guide for Owners in 2025

Where to Find Reliable Fiat Repair Services Near Me

• Drive the car for about 30 km (20 miles) after changing or adding oil.
• Park the vehicle on level ground.
• Turn off the engine and let the car sit for five minutes before checking.

Step 5: If the Level Is Low or High

• If the level is below the minimum, add only the recommended type and amount of oil for your specific engine.
• If the level is too high, do not drive the car—contact a service center to remove the excess oil.
• Avoid overfilling; too much oil can cause increased pressure and engine damage.

Practical Tips and Common Mistakes to Avoid

Useful Tips

1. Always check the oil on flat ground—inclines affect the reading.
2. Wait several minutes after shutting off the engine to allow oil to settle.
3. Use only Volvo-approved oil to maintain engine performance and warranty coverage.

Common Mistakes

• Checking too soon after adding oil: the system needs time to recalibrate.
• Ignoring the “No value available” message: it doesn’t mean a malfunction; the car just needs the right conditions.
• Overfilling: adding too much oil can damage the engine seals or catalytic converter.

Quick Summary

• The Volvo XC40 (2019–2025) uses a digital oil level sensor instead of a dipstick.
• Access the oil level display via Car Status → Status on the center screen.
• For accurate readings: drive around 30 km, park on level ground, turn off the engine, and wait five minutes.
• If oil is low, top up with the correct grade; if high, seek professional help.
• Regular monitoring helps ensure optimal engine health and prevents costly repairs.

Frequently Asked Questions

Can I check the oil level without turning on the car?

No. The oil level reading only becomes available when the vehicle is on or in ignition mode.

What does “No value available” mean?

This message indicates that the vehicle hasn’t met the correct conditions (temperature, flat surface, resting time) for a valid reading. It’s not an error.

How much oil should I add if the level is low?

Only add the amount required to bring the reading near the MAX line. Overfilling is just as harmful as running low.

Conclusion

Checking the oil level in your Volvo XC40 (2019–2025) is simple once you understand how the electronic system works. Instead of using a dipstick, the car relies on a smart sensor that measures oil electronically and displays the result on your infotainment screen. Following the proper steps—driving briefly after refilling, parking on a flat surface, and waiting a few minutes—ensures accurate results. Regular monitoring will keep your engine running smoothly and extend its lifespan.

Volvo XC40 Windshield Replacement Cost: Complete Guide for Owners in 2025

Where to Find Reliable Fiat Repair Services Near Me

Choosing the Best Seat Covers for Your Fiat 500

If you want to know other articles similar to Volvo XC40 (2019–2025): How to Check the Engine Oil Level you can visit the category Service and Parts.