Hyundai i10 Engine Oil Capacity and Specifications (All Models and Years)

Overview
Choosing the right engine oil and maintaining proper oil levels are vital for the longevity and performance of your Hyundai i10. Whether you drive a first-generation i10 (2008–2013) or a newer model (2014 onward), each engine variant has specific oil requirements that must be followed carefully. In this complete guide, we detail the oil capacity, oil type, and service intervals for every Hyundai i10 engine.
Engine Oil Capacity by Generation
1. Hyundai i10 (PA) — 2008 to 2013
The first-generation Hyundai i10 offered a variety of petrol and diesel engines under the Epsilon, Kappa, and U-Line (CRDi) families. Below is a breakdown of each variant:
| Engine | Engine Code | Oil Capacity (Litres) | Oil Change Interval |
|---|---|---|---|
| 1.0 D-CVVT (2011–2013) | Kappa | 2.7 L | Every 20,000 km |
| 1.1i (2008–2013) | G4HG (Epsilon) | 3.0 L | Every 20,000 km |
| 1.1i LPG (2012–2013) | G4HG (Epsilon) | 3.0 L | Every 20,000 km |
| 1.2i (2010–2013) | Kappa | 3.5 L | Every 20,000 km |
| 1.25i (2008–2010) | G4LA | 3.5 L | Every 20,000 km |
| 1.25i (2010–2013) | Kappa | 3.5 L | Every 20,000 km |
| 1.1 CRDi (2008–2010) | D4FA | 5.3 L | Every 20,000 km |
| 1.1 CRDi DPF (2008–2010) | D4FA | 5.3 L | Every 20,000 km |
2. Hyundai i10 (IA) — 2014 and Onwards
The second-generation i10 uses the refined Kappa engine family, featuring improved efficiency and lower emissions. The oil capacities and maintenance schedules vary slightly depending on engine displacement and fuel type.
| Engine | Engine Code | Oil Capacity (Litres / Filter) | Service Interval |
|---|---|---|---|
| 1.0 MPi (2014– ) | Kappa | 3.0 L (0.3 L filter) | 20,000 km / 12 months |
| 1.0 LPGi (2014– ) | Kappa | 3.0 L (0.3 L filter) | 20,000 km / 12 months |
| 1.2 MPi (2014– ) | Kappa | 3.5 L (0.2 L filter) | 40,000 km / 24 months (check every 20,000 km) |
| 1.25 MPi (2014– ) | Kappa | 3.5 L | 20,000 km / 12 months |
Recommended Engine Oil Type
To protect the engine under all driving conditions, Hyundai recommends using high-quality fully synthetic engine oils that meet or exceed ACEA A5/B5, API SN, or ILSAC GF-5 standards.
| Engine Type | Recommended Oil Viscosity | Oil Specification |
|---|---|---|
| Petrol Engines (1.0, 1.1, 1.2, 1.25) | 5W-30 or 5W-40 | API SN / ACEA A5 |
| Diesel Engines (1.1 CRDi) | 5W-30 (Low SAPS for DPF) | ACEA C3 / API CF |
Tip: For regions with very cold winters, 0W-30 may improve cold-start performance.
You may be interested in readingHyundai i10 1.2 Timing Chain Replacement Cost and Diagnosis Guide
Oil Change Intervals and Maintenance Tips
Changing your Hyundai i10’s oil on time ensures optimal lubrication, efficiency, and reduced wear. Here’s what we recommend:
Standard Driving Conditions
- Change engine oil every 20,000 km or 12 months, whichever comes first.
- Replace the oil filter at every oil change.
- Inspect the air filter and spark plugs every 20,000 km.
Severe Driving Conditions
If you frequently drive in heavy traffic, dusty areas, or extreme temperatures:
- Reduce oil change interval to 10,000–12,000 km.
- Use high-performance synthetic oil for better protection.
How to Check Engine Oil Level
- Park the car on a level surface and switch off the engine.
- Wait 5–10 minutes for the oil to settle.
- Pull out the dipstick, wipe it clean, and reinsert it fully.
- Remove again and ensure the oil level lies between the MIN and MAX marks.
Maintaining proper oil level prevents engine knocking and ensures smooth performance.
Step-by-Step Oil Change Guide (DIY)
If you prefer doing your own maintenance, follow these steps:
- Warm up the engine for 2–3 minutes.
- Lift the vehicle using a jack and secure it safely.
- Remove the oil filler cap and drain plug underneath the sump.
- Let the oil drain completely into a pan.
- Replace the oil filter.
- Refill with the correct amount of fresh oil.
- Check the level using the dipstick and top up if needed.
- Start the engine and ensure there are no leaks.
Frequently Asked Questions (FAQs)
1. How many litres of oil does a Hyundai i10 1.2 take?
The 1.2-litre Kappa engine requires 3.5 litres of oil including filter capacity.
You may be interested in reading
Hyundai i10 1.2 Timing Chain Replacement Cost and Diagnosis Guide
Peugeot 208 Engine Oil Guide: The Complete Maintenance and Oil Type Handbook2. What is the best oil for Hyundai i10 petrol engines?
A fully synthetic 5W-30 or 5W-40 oil meeting API SN or ACEA A5/B5 is ideal for petrol variants.
3. Can I use 10W-40 oil in my i10?
While it’s acceptable in warmer climates, 10W-40 is not recommended for cold starts. Hyundai prefers 5W-30 for most climates.
4. How often should I replace the oil filter?
With every oil change — approximately every 20,000 km or once a year.
5. What happens if I overfill engine oil?
Overfilling can cause foaming, reduced lubrication, and engine damage. Always keep the oil level within the dipstick range.
Final Thoughts
The Hyundai i10, whether equipped with the nimble Kappa petrol engine or the efficient CRDi diesel, thrives on timely oil changes and correct lubrication. By following the recommended oil capacities, viscosities, and maintenance intervals, you’ll ensure your i10 delivers smooth, reliable, and efficient performance for years.
You may be interested in reading
Hyundai i10 1.2 Timing Chain Replacement Cost and Diagnosis Guide
Peugeot 208 Engine Oil Guide: The Complete Maintenance and Oil Type Handbook
Peugeot 208 Boot Space: Full Guide to Capacity, Dimensions & Comparisons (2025)If you want to know other articles similar to Hyundai i10 Engine Oil Capacity and Specifications (All Models and Years) you can visit the category Service and Parts.
Deja una respuesta

More content of your interest