SEAT Arona Tyre Pressure Reset Procedure: Complete Step-By-Step Guide

Understanding How the SEAT Arona TPMS Works

The SEAT Arona uses an indirect tyre pressure monitoring system, meaning there are no physical pressure sensors inside the wheels. Instead, the system reads rotational speed from the ABS wheel speed sensors. When one tyre rotates at a noticeably different rate, the car interprets this as a pressure problem.

Because of its indirect nature, the TPMS must be manually recalibrated whenever tyre pressures change or wheels are replaced. Without this reset, the warning system cannot accurately detect future issues.

When You Need to Reset the Tyre Pressure System

Situations That Require a Manual TPMS Reset

• After inflating or deflating any tyre
• When replacing one or more tyres
• After rotating the wheels
• When fitting a spare wheel
• If the TPMS warning light stays on after pressure correction
• After uneven tyre wear has been resolved
• When replacing ABS wheel speed sensors

The system does not automatically update itself—it always depends on you performing the reset.

Checking the Correct Tyre Pressures Before Resetting

Where to Find the Recommended Values

SEAT places the official pressure chart on:

• The driver’s door frame (B-pillar)
• The inside of the driver’s door

Always use the exact values listed for your wheel size and load conditions.

Cold Tyre Requirement

To ensure accurate readings:

• Tyres are considered cold if the car has not been driven for 3+ hours
• Or if you have driven less than 1 mile after a rest period

Resetting with warm tyres can lead to incorrect calibration.

Resetting Tyre Pressure Using the Easy Connect Infotainment System

Infotainment Reset: Step-By-Step Process

1. Inflate All Tyres to the Correct Values

Start by adjusting all four tyres according to the pressure chart.

2. Open the Vehicle Menu

Use one of the following methods:

• Press MENU → tap Vehicle, or
• Press the CAR button to go straight to vehicle options

3. Enter the Settings Area

Tap SETTINGS to open the configuration menu.

4. Select the Tyres Menu

Tap Tyres to view TPMS options.

5. Identify the TPMS System

Depending on your software version, you will see:

• Tyre Monitor System, or
• Tyre Pressure Loss Indicator

Select the one shown in your system.

Seat Arona Towing Capacity Guide: Complete Braked & Unbraked Weights for Every Engine

6. Press the Set Button

This prepares the system to store new values.

7. Confirm the Pressures

A message will appear saying:

“Do all 4 tyre pressures match the required values?”

Tap OK.

8. Reset Complete

A confirmation message appears, and the system begins recalibrating.

Resetting Tyre Pressure Using the Physical TPMS Button

Some SEAT Arona models do not include the infotainment method. Instead, they use a physical SET button.

How to Reset Using the Button

1. Adjust All Tyres First

Confirm all values match the driver-door pressure chart.

2. Ensure the Vehicle Is Completely Stationary

The reset will not work while the car is moving.

3. Switch the Ignition to ON

Do not start the engine—just power the electrical system.

4. Press and Hold the Tyre Pressure SET Button

Located on the centre console.

Hold until:

• You hear a beep, or
• The dashboard confirms the reset

5. Reset Complete

Once confirmed, the TPMS calibrates based on the new pressures.

Why the Tyre Pressure Warning Light Flashes

A flashing light usually indicates a system fault rather than a simple pressure issue.

Seat Arona Towing Capacity Guide: Complete Braked & Unbraked Weights for Every Engine

SEAT Arona Tyre Size: Full Guide to Dimensions, Best Tyre Options & Correct Fitment

Common Causes of a Flashing TPMS Light

ABS Wheel Speed Sensor Fault

Because the Arona uses ABS sensors to judge tyre pressure, any sensor failure or wiring issue will trigger the TPMS.

Uneven Tyre Wear

Tyres with significantly different tread depths cause different rolling radiuses.

Incorrect or Uneven Pressures

A tyre that is visibly different in pressure from the others can create erratic rotational feedback.

Mismatched Tyre Brands or Sizes

Different constructions or materials affect the tyre circumference, confusing the system.

Reset Not Performed After Tyre Change

The TPMS cannot detect new baselines unless it has been manually reset.

How Long the System Takes to Recalibrate

Immediate Reset vs Learning Period

• The reset confirmation is instant
• Full recalibration typically completes during the next few minutes of normal driving

If the warning light remains after driving for a short time, recheck all pressures and repeat the process.

Typical Errors When Resetting the SEAT Arona TPMS

Avoid These Common Mistakes

• Resetting without checking all four tyres
• Resetting with warm tyres
• Mixing tyre sizes or brands
• Failing to recalibrate after tyre rotation
• Ignoring flashing lights caused by ABS faults
• Attempting a reset while the car is moving

These errors prevent the system from learning accurate baseline values.

Tips to Keep the TPMS Accurate Long-Term

Recommended Maintenance Practices

• Check tyre pressures at least once a month
• Use cold tyre readings for accuracy
• Reset after every change involving tyres or wheels
• Inspect for uneven wear regularly
• Replace tyres in matching sets
• Keep ABS sensors clean and functioning

Following these practices ensures accurate monitoring and longer tyre life.

Final Thoughts

The SEAT Arona’s indirect TPMS is dependable when maintained correctly. Resetting tyre pressure values is essential every time tyre pressure, wheel configuration, or tyre wear changes. Whether using the infotainment system or the physical TPMS button, the reset process is quick, straightforward, and key to preventing false warnings. If the light flashes after a reset, it often points to ABS sensor issues, uneven wear, or mismatched tyres—problems that should be addressed promptly.

FAQs

1. Why won’t the TPMS light turn off even after inflating the tyres?

Because the system requires a manual reset to store the new pressures.

2. Is it safe to drive with a flashing tyre pressure light?

A flashing light signals a fault. While short drives are possible, it’s best to diagnose the issue immediately.

3. Should I reset the TPMS after rotating the tyres?

Yes—any change in wheel position affects the calibration.

4. How long do I hold the TPMS reset button?

Hold the button until you hear the beep or see confirmation—typically 2–5 seconds.

Seat Arona Towing Capacity Guide: Complete Braked & Unbraked Weights for Every Engine

SEAT Arona Tyre Size: Full Guide to Dimensions, Best Tyre Options & Correct Fitment

Seat Arona Cambelt Change — The Complete 2025 Guide

5. Does the SEAT Arona use indirect or direct TPMS?

It uses an indirect TPMS that depends on ABS wheel speed sensors.

If you want to know other articles similar to SEAT Arona Tyre Pressure Reset Procedure: Complete Step-By-Step Guide you can visit the category Service and Parts.