How to Reset the Service Light on a Hyundai Kona (Full Step-by-Step Guide)

Understanding the Hyundai Kona Service Indicator

The service light on the Hyundai Kona is more than a reminder—it is the on-board notification system that keeps track of oil change intervals, tire rotation needs, and mileage-based maintenance. When the required service has been completed, we must reset the indicator to ensure the Kona begins tracking the next interval accurately. Resetting prevents incorrect alerts, reduces dashboard clutter, and keeps the digital maintenance logs aligned with real-world work.

When You Should Reset the Service Light

Resetting the service reminder becomes necessary whenever scheduled maintenance is performed. Typical scenarios include:

Oil Change Completion

Once fresh oil and a new filter have been installed, the system must be reset so the ECU can begin calculating the next oil-change interval.

Tire Rotation

Whether the rotation follows a front-to-rear or cross-pattern routine, the service indicator should be cleared to match the maintenance performed.

Mileage-Based Service Tasks

This includes:

• Cabin air filter replacement
• Engine air filter replacement
• Brake fluid checks
• Coolant inspections
• Transmission fluid checks
• Multi-point inspections

Full Step-by-Step Methods to Reset the Hyundai Kona Service Light

Two primary reset procedures work on most Hyundai Kona variants (2017–2024+). Each method is simple, requires no tools, and can be performed in under a minute.

Method 1: Resetting the Service Light Using the Multi-Information Display (MID)

This is the most accurate and commonly used reset procedure.

Step-by-Step Instructions

1. Turn the ignition to ON
   Press the Start/Stop button twice without touching the brake. Do not start the engine.
2. Navigate to the “Service” screen
   Use the TRIP or OK button on the steering wheel until the Service Interval or Service Required screen appears.
3. Press and hold
   Hold the OK / TRIP button until the display begins to flash.
4. Confirm reset
   Release the button. The service interval should now reset to the default mileage (e.g., 10,000 miles or 15,000 km depending on region).

Notes

• Some models require navigating into User Settings → Service Interval → Reset.
• If "Reset" is greyed out, ensure the ignition is in ON without the engine running.

Method 2: Accelerator Pedal Reset Procedure

This alternate method works for certain trims and earlier model years.

Step-by-Step Instructions

1. Turn ignition to ON
   Do not start the engine.
2. Hold the accelerator to the floor
   Keep it fully depressed for 3–5 seconds.
3. Release the pedal
   The service light should clear automatically after the ECU registers the input sequence.

When This Method Works Best

• If the steering-wheel button menu is unresponsive
• If the MID reset screen does not appear
• When the Kona has had a battery disconnect or ECU reset

Troubleshooting: What to Do if Your Service Light Does Not Reset

If the indicator stays on, consider the following checks:

Hyundai Kona Towing Capacity: The Complete, Expert-Crafted Guide

Verify the Maintenance Was Fully Completed

• Oil level correct
• Filter properly installed
• Tire rotation performed
• Fluid checks completed

Look for Other Warning Indicators

A persistent:

• Check engine light
• ABS indicator
• TPMS alert
  may override the service reminder and must be resolved first.

Ensure the Ignition Mode Is Correct

Many failed resets occur because the engine is running instead of ignition ON mode.

Review the Owner’s Manual

Kona trims differ slightly by year. Some have additional submenu steps under “Convenience” or “Cluster Settings.”

Consider Visiting a Hyundai Technician

If the service interval is tied to ECU logic referencing mileage unable to be reset manually, a diagnostic tool may be needed.

Importance of Keeping the Service Light Accurate

Resetting is not simply about turning off an alert—it ensures that the Kona continues tracking essential maintenance correctly.

Why Accuracy Matters

• Proper oil-change tracking prevents premature wear
• Tire rotation intervals maintain even treadwear
• System-based reminders keep long-term service predictable
• A synced maintenance schedule improves resale value

Key Kona Maintenance Tasks You Should Never Miss

When following the maintenance log, pay close attention to:

1. Engine Oil & Filter

Critical for lubrication, cooling, and long-term durability.

2. Tire Rotation

Extends tire life and evens wear patterns, improving handling.

3. Air Filter Replacement

Supports clean airflow, prevents debris intrusion, and maintains engine efficiency.

Hyundai Kona Towing Capacity: The Complete, Expert-Crafted Guide

Hyundai Kona Dashboard Warning Lights: The Complete Guide to Every Symbol and Meaning

4. Brake System Maintenance

Includes:

• Pads
• Rotors
• Fluid checks
  Vital for safety and immediate braking response.

5. Fluid Top-Offs

Essential fluids to verify include:

• Coolant
• Brake fluid
• Transmission fluid
• Power steering fluid (if applicable)

Keeping Your Hyundai Kona Running at Its Best

When the service light is reset at the correct time, the Kona’s maintenance schedule stays aligned with reality. This helps the vehicle operate reliably for years, reducing wear, preventing costly repairs, and ensuring every maintenance milestone is recorded accurately by the onboard computer.

Final Thoughts

Resetting the Hyundai Kona service light is an essential part of ensuring accurate maintenance tracking. When we follow the steps carefully—whether using the MID or accelerator pedal method—the system resets correctly and keeps the Kona’s maintenance reminders reliable. By pairing proper resets with consistent upkeep, we safeguard performance, fuel efficiency, and long-term reliability.

Frequently Asked Questions

1. Can I damage the Kona if I don’t reset the service light?

No damage occurs, but it leads to incorrect maintenance tracking and constant alerts.

2. Can the service light reset itself automatically?

No. The system does not auto-reset and requires manual input after maintenance.

3. Why does the reset menu not appear on the screen?

Some trims require accessing User Settings → Service Interval or using the accelerator pedal method.

4. Will resetting the service light erase fault codes?

No. It only resets the maintenance reminder; engine fault codes remain stored.

5. How often does the Hyundai Kona typically require service?

Most models require service every 10,000–15,000 km or 6–12 months, depending on market and driving conditions.

Hyundai Kona Towing Capacity: The Complete, Expert-Crafted Guide

Hyundai Kona Dashboard Warning Lights: The Complete Guide to Every Symbol and Meaning

Hyundai Kona Tire Size Chart (Complete Expert Guide)

If you want to know other articles similar to How to Reset the Service Light on a Hyundai Kona (Full Step-by-Step Guide) you can visit the category Service and Parts.